Care & Maintenance
Download PDF

Fabric

Vacuuming is usually sufficient to clean the fabric. When stained use lukewarm water and gently wipe (do not rub too much on the material). Always use white cloths to avoid discoloration. For more stubborn stains, use a pH neutral soap or a detergent suitable for that particular fabric. More detailed information here: Camira instructions and Kvadrat instructions.

Felt

Vacuum or dust wipe gently. For stains, use lukewarm water and dry gently (do not rub on the material). If this does not help contact the supplier for further instructions.

Laminate

Wipe gently with a soft, dry cloth. For stains, use a soft cloth with ammonia (window cleaner), which eliminates the need for dry- ing streaks. Remember not to use abrasive detergents.

Leather

Wipe with a dry soft cloth for regular cleaning. Do not use vacuum cleaners, this can scratch the surface. When stains wipe or rub gently with a damp cloth. Do not use chemical coatings, cleaners or soap solutions. This does not help contact the supplier for further instructions. Remember not to place the furniture too near a heat source, leave a gap of 5-6 inches and avoid placing it in sunlight.

Marble

Marble is porous and stains easily. Wipe off anything spilled on marble immediately. Occasionally wash marble surfaces with lukewarm water and wipe dry with a clean cloth. To avoid leaving streaks, wipe surface with a damp chamois cloth. Should your marble surfaces require a more thorough cleaning, wash with a mild household liquid detergent solution, rinse and wipe dry.

Metal

Wipe gently. For stains, use lukewarm water and mild detergent without solvents and abrasives. Dry with a soft cloth.

Polyurethane

Wipe gently. For stains, use lukewarm water and mild detergent without solvents, alcohol or abrasives. Dry with a soft cloth.

Solid Surface

For day to day cleaning, warm soapy water or non-abrasive household cleaners such as glass cleaner or commercially available solid surface cleaners will remove most residues. Then rinse and towel dry the surface to prevent spotting especially in areas with hard water.

Vinyl

Wipe with a dry soft cloth for regular cleaning. Do not use vacuum cleaners, this can scratch the surface. When stains wipe or rub gently with a damp cloth. If this does not help contact the supplier for further instructions. Remember to always finish by wiping the furniture with lukewarm water. Detergents can be ordered from Corium AB.

Wood

Wipe gently. For stains, use lukewarm water and mild detergent without solvents and abrasives. Wipe off any moisture. Remember that wood is a living material, light from illumination and sunshine have some impact on the wood surface color and brightness. Therefore, wood can change in color and brightness.